FN-1010 IOT Soldering Station

Features of the FN1010-22 IOT Soldering Station

Enables human error-free temperature control and traceability of manual soldering process

FN1010-22 IOT Soldering Station and FG100B equipped with communication function.
Pioneer the future of soldering with advanced IoT technology

“Process control” and “Traceability” can be established through daily manual soldering operation.

Optimization of soldering conditions is now possible based on a variety of information in daily soldering process collected by FN-1010. Information to be collected The following information can be collected by memory chip in T36 series tip and saved in a computer through a soldering station. Tip shape Tip Serial number Number of loads Total time of power supplied Load sensitivity Type of solder alloy (Lead-Free / Lead) Count alarm

Automatic calibration/off-set can be completed once measurement result is sent through infrared.

Human error-free “tip temperature calibration ” and “off-set” can be established through daily manual soldering process. Results of measurement/calibration/off-set can be recorded automatically.Options for IoT communication Please choose the options according to the numbers of units and the connection port of PC and server.

* RS232C cannot be connected with some PCs. Please check.

Visualize energy supplied during soldering

It is now possible to visualize invisible energy supplied from T36 series Soldering Iron tip during soldering. And that makes it possible to control factors of soldering, which were impossible before.

HAKKO FN1010-22 IOT Soldering Station

Real-time work status on the LCD screen

Improved button operation

Quick access to “Preset temperatures” and “Off-set mode” with one push.
It takes few button operation to access to most frequently used functions.

Notification of alarm with sound and vibration Alarm can be notified with vibration in a noisy environment.
Free fall detection function Built-in motion sensor detects free fall and cuts the power. It can prevent burning floor, a fire and other accident with the heat.

Tip cleaner with solder ball preventive design

Solder ball during tip cleaning can be reduced by 99% with devised cleaner designs such as smaller aperture, and set angle as well as position. * In-house comparison Tip replacement without heat resistant pad