375-06 Compact Solder Feeder for 0.6mm Solder, smoothly feeds solder from the reel to your work to improve efficiency.
|Optimal for minimizing solder and flux splash
Solder feeding equipment with V-grooving function for superior cost performance
|Minimize solder and flux splash
As shown below, when solder is cut with a V-groove it enables the release of gas pressure generated by the flux, thereby suppressing splash. However, because the V-groove exposes the flux to outside air the solder cannot be stored for a long period of time.
When using solder with the HAKKO 375, you can groove the solder that you require.
You can browse and download “Instruction Manuals” and “SDS” freely.
|Advantages of V-grooved solder|
|-Examination of solder/flux splash|
*The effect of solder and flux splashing prevention may differ under different operation conditions.
|-Measurement graph of flux splash amount|
|Applicable solder dia.
ø0.3, ø0.5, ø0.6, ø0.8, ø1.0mm
Usage / Applications
|Can be applicable with the conventional solder reel stand.
(Can be applicable with the HAKKO 611)
|Use an option switch to increase efficiency
Control the amount of solder that is fed using the ON/OFF switch. Use an option switch or hand switch to increase functionality even more.
Also Available for the following Solder Sizes:
375-08 Compact Solder Feeder for 1.0mm Solder
375-07 Compact Solder Feeder for 0.8mm Solder
375-06 Compact Solder Feeder for 0.6mm Solder
375-05 Compact Solder Feeder for 0.5mm Solder