, , , , , ,

FT-700 Soldering Tip Cleaner and Polisher

SKU: HFT700-15

Hakko
Availability:

In stock


Soldering tip polisher best suited for the removal of oxidation on soldering tips
Oxidized films firmly sticking to tips are removed using a supplied brush
It prevents the shortening of service life of tips caused by oxidation

£261.85 Excl. VAT

In stock

A minimum sub total of £250.00 is required, You need an additional £250.00 to proceed through to the checkout.

For customers in the Republic of Ireland, please contact us for a quote including shipping and customs charges.

Request quote

Features

“Maintenance kit for oxidized soldering tips”
Especially suitable for soldering tips oxidized by Lead-free solder and high temperature solder
By using the brush and accessory “Chemical Paste”HAKKO FS-100:
Carbide and oxide can be removed without causing damage to the soldering tip
Diamnonium phosphate is not included
Power saving with 3 watts low consumption.
HAKKO FT-700 Tip Polisher / Tip condition before and after polishing with HAKKO FT-700 tip polisher

Usage/Applications

Cleaning procedure
Oxidized tip
Oxidized tip
Use a temperature setting of around 350°C.Cleaning is now completed.
Cleaning is now completed.
HAKKO UK - FT700-15 Soldering Tip Cleaner and PolisherHAKKO UK - FT700-15 Soldering Tip Cleaner and Polisher
HAKKO UK - FT700-15 Soldering Tip Cleaner and Polisher
Remove carbide and oxide.
HAKKO UK - FT700-15 Soldering Tip Cleaner and PolisherRe-tin the tip.
Tin the tip.
(remove oxide)
HAKKO UK - FT700-15 Soldering Tip Cleaner and PolisherHAKKO UK - FT700-15 Soldering Tip Cleaner and Polisher
Clean off chemical paste from the tip surface.
HAKKO UK - FT700-15 Soldering Tip Cleaner and PolisherHAKKO UK - FT700-15 Soldering Tip Cleaner and Polisher
Tin the tip with solder.
HAKKO UK - FT700-15 Soldering Tip Cleaner and Polisher
Repeat the process twice or more until oxide is completely removed.

 

NOTE:When the tip temperature is over 400°C, even if the oxidation film is removed by “HAKKO FT-700 tip polisher”, the tip can turn to be oxidized quickly again.
When carbide and oxide cannot be removed by the above procedure
When carbide and oxide are hard, they sometimes cannot be removed even by the HAKKO FT-700. In this case, first use the brush which included in the unit as one of accessories and clean the tip by the above procedure.
Remove oxidation film using brush included with HAKKO FT-700NOTE:
When the brush is used, small scratches may be produced on the iron plating surface of the tip.
Do not always use the brush, but use only when oxidation cannot be removed by cleaning with HAKKO FT-700.

Packing List

Part No.Packing List
No.FT700HAKKO FT-700 Tip Polisher, HAKKO FS-100 Paste, Brush: 1pc each

Specifications

Model No.FT-700
Power consumption3W (100V), 4.5W (110 to 120V, 220 to 240V)
Dimensions70(W)×54(H)×101(D)mm
Weight0.65kg
・Chemical Paste
Amount10g
IngredientsFlux, tin(Sn) 50wt%(each)
* Weight (w/o cord) * The flux component of chemical paste consists of Alicyclic amine hydrobromate, Aliphatic amine hydrobromate, Petrolatum, Wax. Make sure the tip is cleaned after use according to the cleaning procedure. * Do not use the chemical paste for purposes other than restoring of the soldering tip.

Replacement Parts

Part No.NameSpecifications
HAKKO UK - FS-100 pasteFS-100HAKKO FS-100 pasteBuy
photo:B3051B3051BrushBuy
photo:B3052B3052Polishing brush (qty 2)Buy

Tech Tips

Tech Tips

CategoryTitle
Derek's Tech TipsEffective Cleaning & Maintenance of Soldering Tips
Weight0.8447 kg

You may also like…