Thank you for visiting the only authorised wholesaler of Hakko products in the UK and Ireland. Please note: we have a minimum order value of £250 excluding shipping. Orders under this value will not be processed at checkout.
Some customers have reported that they have not received emails from hakko.co.uk. Please check spam, junk etc folders. We apologise for any inconvenience; our technical team are currently working on this issue. Christmas Closure 2026. Last order date: 11th December 2026 Last shipment date: 16th December 2026 Orders received after 11th December will be shipped in the New Year, after 4th January, 2027 Dismiss
In Shape BCM/CM, surface tension of solder in the hollow section:
Enables bridging to be corrected;
When the tip is placed, solder left in a hollow section absorbs solder in the bridge section. Please use this shape if solder amount of the bridge is small. * If solder amount of the bridge is large, Shape J, K and H are recommended. For further details, see the “Correcting Bridging”
Prevents bridging from occurring when drag soldering;
Since the pulling force due to surface tension of this type is stronger than that of Shape BC, solder is not left in unnecessary areas during drag soldering.
Drag soldering
Feed solder on a hollow section and drag the tip along slowly.
Apply flux to leads and land pads before soldering. It prevents the troubles such as solder bridge.
Correcting Bridging
1. Clean solder left in the hollow section by a cleaning sponge, etc.
A small amount of solder may be left in the hollow section.