, , , , ,

T20-J02 Angled Soldering Tip R0.2 /30° x9mm

SKU: HT20-J02

Hakko
Availability:

Available for order*


T20 Soldering Tip Shape-0.2RSB For the FX-8301. FX-8302

£39.18 Excl. VAT

Available for order*

A minimum sub total of £250.00 is required, You need an additional £250.00 to proceed through to the checkout.

For customers in the Republic of Ireland, please contact us for a quote including shipping and customs charges.

Request quote

How to use Shape J and examples

This shape differs from Shape B and I by bending the tip end and is capable of soldering by applying the tip in 2 ways: face and point. It is used for drag soldering and correction of bridging

Soldering tiny chip parts such as 0603

H K Wentworth - HAKKO UK and Ireland distributorLay down the end pad section and put the tip to the land.
* Soldering tip in the picture is T30-J with an N2 system iron for pre-heating effect.

Some IC is specified by manufacturer not to be touched electrode by tip end.

Drag soldering

H K Wentworth - HAKKO UK and Ireland distributorLay down the end pad section and drag the tip slowly.

Apply flux to leads and land pads before soldering. It prevents the troubles such as solder bridge.

Correcting Bridging

H K Wentworth - HAKKO UK and Ireland distributorIf the bridge amount is small

Stand the tip on end and drag the tip slowly.

Please operate with clean tip.

H K Wentworth - HAKKO UK and Ireland distributorIf the bridge amount is large

Lay down the end pad section and drag the tip slowly while putting the tip on the solder in the bridged section.

Please operate with clean tip.

H K Wentworth - HAKKO UK and Ireland distributor
The operating bellow is also available.

Soldering at the narrow pitches

H K Wentworth - HAKKO UK and Ireland distributorYou can hold the grip with the natural angle (Refer to A) while soldering with Shape J, which has the same high-angle of tip end (Refer to B) as Shape I.

H K Wentworth - HAKKO UK and Ireland distributorH K Wentworth - HAKKO UK and Ireland distributor
Shape JShape I
Weight0.0157 kg