, , , , , , , ,

FT-710 Soldering Tip Cleaner and Polisher

SKU: HFT710-05

Hakko
Availability:

Low stock – Order soon


older-splash-preventing rotary tip cleaner
Level of solder removal can be adjusted using two different types of brushes. It also reduces the oxidation of tips
Brushes can be replaced without using any tools, and safe design prevents solder wastes from entering drive part

£149.92 Excl. VAT

Low stock – Order soon

A minimum sub total of £250.00 is required, You need an additional £250.00 to proceed through to the checkout.

For customers in the Republic of Ireland, please contact us for a quote including shipping and customs charges.

Request quote

Features

Tip cleaner having both wire-type and sponge-type advantages
Prevents solder from splashing when cleaning.
Inserting just the tip into the receptacle completely prevents solder from splashing.
Inserting the iron here blocks the receptacle and prevents solder from splashing.H K Wentworth - HAKKO UK and Ireland distributor
Two-types of brushes control how much solder is removed.
Solder removal status can be adjusted by plastic brushes and metallic brushes.
With wire-type cleaners, excessive amounts of solder remain on the tip, which causes solder to splash when soldering. With sponge-type cleaners, oxidation is promoted, which causes shorter tip life.
A tip cleaner with both wire-type and sponge-type advantages eliminates the above problems when soldering.

Comparison of how much solder is removed by the different cleaning methods<
* The photos show the iron tips T12-D24.
Comparison of how much solder is removed by the different cleaning methods
Minimizes decrease in temperature of the tip while cleaning.
Inserting the tip turns the brush automatically; no need to switch it on and off.
Reduces the tip cleaning time between soldering works to increase work efficiency.
The electric rotary cleaner provides a uniform final cleaning status with no differences between individuals.

Comparison of decrease in tip temperature by cleaning method
If decrease in temperature is small, the time for a single cleaning also becomes short. Because cleaning is performed many times per day, the overall working time can be also shortened.
Time for single cleaning (The time for a single cleaning is measured as the time until the tip temperature reaches the set temperature after cleaning.)
HAKKO FT-710Approx. 2.3 sec. (reference value)
Wire-type HAKKO 599BApprox. 2.9 sec. (reference value)
Cleaning spongeApprox. 6.0 sec. (reference value)

Comparison of decrease in tip temperature by cleaning method

The low-noise design relieves stress due to noise during work.
* This cleaner is very quiet in comparison with competitor’s electric tip cleaner.
Easy to maintainEasy to maintain
Easy-to-replace brushes
Brushes can be replaced without removing any screws.
Solder left inside is stored in “Solder waste collector”.
Solder does not splash all over the inside of the main body.
Safe design prevents brushes from turning unexpectedly during replacement.
The brush cannot be replaced unless the AC adapter is unplugged.
This tip cleaner can be attached to HAKKO iron holders HAKKO FH-101, FH-200 and FH-201.
This tip cleaner can be attached to any of the above 3 iron holders using just 2 screws. For other iron holders, this tip cleaner can be placed next to the iron holder.
Example when attached to the HAKKO FH-200,Example when using with the HAKKO FH-800* The HAKKO FT-710 itself cannot be used as an iron holder. Be sure to use it together with an iron holder.

Packing List

* Some soldering irons or tip shapes are NOT available.
Please check 'Specification' if your soldering iron or tip shapes are available.

Part No.Packing List
FT-710HAKKO FT-710, AC adapter, Receptacle A and B, Lock nut, Solder waste collector, Gauge, Instruction manual
NOTE: Optional Part Receptacle C being purchased, HAKKO 917(Discontinued) (Station HAKKO 938(Discontinued)) and HAKKO FX-8301(Station HAKKO FX-838) are also available.

Specifications

Model No.FT-710
RatingDC 24 V 130 mA
Brush rotational speed2,500rpm
Standard receptacleReceptacle A and B
Dimensions71(W)×77(H)×107(D) mm
Weight450g

・AC Adapter

Output voltageDC 24 V
Applicable Soldering Iron List
ReceptacleSoldering tipUnusable shapeCustom-ordered shapeSoldering iron
Receptacle AT7 seriesT7-JL02
Spatula
T7-KFHAKKO FM-2027
Station:
HAKKO FM-202 (Discontinued)
T11 series--HAKKO FX-901
T12 seriesT12-JL02
Quad
Tunnel
Spatula
T12-WB2
T12-WD08
T12-WD12
T12-WD16
T12-WD52
T12-WI

T12-DL52
T12-KF
HAKKO FM-2027/2028 for Japan, Oceania, Asia & Other countries
Station:
HAKKO FM-203, HAKKO FX-950, HAKKO FX-951, HAKKO FX-952, etc.
T15 seriesT15-XD15
T15-JL02
T15-JD14
T15-JD16
T15-R48
Quad
Tunnel
Spatula
T15-1603
T15-1605
T15-BC15
T15-BC28
T15-CF2
T15-CF3
T15-SB03
HAKKO FM-2027/2028 for North America & EU. Station:
HAKKO FM-203, HAKKO FX-950, HAKKO FX-951, HAKKO FX-952, etc.
Receptacle BT14 series--HAKKO 957 (Discontinued)
T18 series--HAKKO FX-8801 Station:
HAKKO FX-888 (Discontinued),
HAKKO FX-888D
T34 series--DASH:FX-650 series
900 M series900M-T-H
900M-T-1.8H
900M-T-LB
900M-T-1.2LD
HAKKO 900 Type Medium HAKKO 907
Station:
HAKKO 928 (Discontinued),
HAKKO 936 (Discontinued),
HAKKO 937 (Discontinued) etc.
Receptacle C (Optional Part)T10 series-T10-J02
T10-K
T10-KL
T10-KU
T10-LB
T10-LI
HAKKO 917 (Discontinued)
Station:
HAKKO 938 (Discontinued)
T13 series
T17 series
--HAKKO FM-2026
Station: HAKKO FM-203, HAKKO FX-950, HAKKO FX-951, HAKKO FX-952, etc.
T20 series-T20-K
T20-KU
T20-BL
T20-BL2
T20-BL3
HAKKO FX-8301
Station:
HAKKO FX-838
T22 series-T22-C3
T22-BL
T22-BL2
T22-D45
T22-J02
T22-K
HAKKO FM-2030,
HAKKO FM-2031
Station:
HAKKO FM-206
Receptacle,
custom-designed
T19 series--HAKKO FX-8805  
Station: HAKKO FX-889
T33 seriesT33-BC2
T33-BC3
T33-BC4
T33-BC5
T33-BC6
T33-D24
T33-D32
T33-D5
T33-D6
T33-1610
T33-1611
T33-SSBC2
T33-SSBC3
T33-SSBC4
T33-SSBC5
T33-SSD24
T33-SSD32
T33-SSD16
T33-SSD6
T33-SS1610
T33-SS1611
HAKKO FX-8802
Station: HAKKO FX-801
PRESTO series--HAKKO PRESTO
*Soldering iron other than listed above (HAKKO FX-100, HAKKO FM-2032, Built-in solder feed type, Nichrome heater type and HAKKO 455/456), and Desoldering / Rework are not available.
Part No.NameSpecifications
photo:A1567A1567Cleaning brush B (metal brushes, qty 2)Buy
B3519Receptacle CBuy
B3523B3523 Lock nut for FT-710 CBuy
B3518B3518 Receptacle B for FT-710Buy
A1566A1566 Cleaning brush A (plastic brushes, qty 2)Buy
B3521B3521 Solder waste collector for FT-710Buy
B3520B3520 Pulley beltBuy

Tech Tips

Tech Tips

CategoryTitle
Derek's Tech TipsEffective Cleaning & Maintenance of Soldering Tips
Weight0.7 kg

You may also like…