FT-802 Thermal Wire Strippers
- Thermal wire stripper for higher quality and more preciseness
- Even very fine AWG 38 can be stripped with standard blades
Thermal wire stripper for higher quality and more preciseness
More sharp, precise, and effective
Thermal wire stripper FT-802 enables higher quality and more precise insulation stripping.
The performance that can strip insulation with no nick can meet the requirement of the latest aerospace industry and the medical industry that require s very high quality.
Thermal strip gives great sharpness.
FT-802 can strip the insulation of AWG 38 wire with no nick.
Conventional wire stripper could make ragged edges of insulation or damage strands.
Due to the tweezers structure, the cutting edges are always aligned.
The blades can be securely fixed by making the frame with tweezers structure.
Even very fine AWG 38 can be stripped with standard blades.
Blades are replaceable and a handpiece can be saved.
No need to replace a handpiece when blades get worn out.
Blades can be easily replaced by using the hex-wrench (included in the unit) and the blade removal plate.
* The blades must be cool before replacement for safety.
Space saving by the integration of station and holder
Output setting by the unit of 5%. Easy to set optimum output level as per material.
Status of a handpiece at glance on the display.
User-friendly design for reduction of stress during the work.
◯A handpiece is correctly set in a holder.
◯Auto sleep function is running.
Option blade can handle even very thick cables
- HAKKO FT-8003 can strip insulation off thick leads that HAKKO FT-8002 could not.
- If cut with a knife blade
It is not recommended to use a knife blade for cable stripping due to the high risk of cutting in the conductor or fraying shield that can result in ruining the cable.
|Model No.||Packing List|
Station (with wire material indicator seal), Handpiece FT-8004 (with lead adjuster), Hexagon socket set screw (M2.5 x 2.5 [qty 2]), Hexagon wrench (1.27 mm), Power cord, Instruction manual
Blades are not included with this product. The desired blades should be purchased separately.
|Output voltage||AC 20V|
・Wire Stripper (FT-8004)
|Power consumption||72W (20V)|
・Optional Wire Stripper (FT-8003)
|Power consumption||46W (24V)|
|Tip to ground resistance||<2Ω|
|Tip to ground potential||1.3mV|
* Length and weight for handpiece (w/o cord, blade)
- G4-1601 Wire Stripper Blade
- G4-1602 Wire Stripper Blade
- AWG 18 to 28
- G4-1603 Wire Stripper Blade
- AWG 26 to 38
- G3-1601 Knife Type Blade