FR-830 PCB Underboard Heater
- Compact pre-heater best suited for heat processing on localized areas
- Featuring quick heatup and less variations in temperature
- Best suited for pre-heating of multi-layer PWBs
|Using the optional equipments|
+ Omnivise C1390C (2 used) (Rework system) +Extension pipe/with backflow prevention lid B3263 (option)
+ SMD rework station HAKKO FR-803B (discontinued)
+ Rework fixture C1392B*
+ Omnivise C1390C* (2 used)
|Various types of switching!
[Hand switch][Foot switch] can be connected.
|Hand switch||Connection cord length: Approximately 100 cm
Switch size: Approx. 30mm (W) × 40mm (D) × 20mm (H)
When using the hand switch, switching is not possible on the main device.
|Foot switch||Connection cord length: Approximately 135 cm
When using the foot switch, switching is not possible on the main device.
|Controlling the temperatures of Hot Air Rework System and workpiece using the Temperature Probe
Measure temperatures of Hot Air Rework System and workpiece using the Temperature Probe for Hot Air Rework System (No. C1541) and thermometer (HAKKO FG-100/HAKKO FG-101) to protect the workpiece.
|Hot air temperature 300ºC
A gap between the hot air outlet and the PWB for 10mm
Attach sensors to top/under sides of P.W.B and measure temperature.
Please keep a gap between the hot air outlet and the PWB for more than 10mm to allow the air to flow. When there is not enough space for the air to flow, the fuse may blow up.
|How to use
|Model No.||Packing List|
|FR-830||HAKKO FR-830, Power cord, Instruction manual|
|Power consumption||210W (100V), 240W (110V), 470W (120V), 230W (220V), 250W (230V), 270W (240V)|
|Air flow||0.15m3/min. (fan capability)|
|Temperature range||150 to 300ºC (Above the blow exit)|
* Weight (w/o cord)
* Height(H) is the distance from bottom of the feet to the top of the hot air outlet.