FR-301 Portable Desoldering Gun
- Mains Powered, Portable Desoldering Gun
- Supplied in robust carry case with all the required extras for “plug and play” operation
- Ideal for travelling technicians
- Use of high thermal efficiency N61 series nozzles
- Reduction of solder clogging by improved heating core
- Easy filter maintenace
- Safe and easy nozzle change with the nozzle wrench
A wide range of nozzles and shapes for any desoldering
Use of high thermal efficiency N61 series nozzles
N61 series nozzles can also be used for HAKKO FR-410 desoldering station.
* N61 series nozzles cannot be used for FR-300.
A wide range of nozzles and shapes for secure desoldering
The nozzles lineup includes diameters from 0.6 mm to 1.6 mm and also oval shape nozzles.
Desoldering on micro land and in fine pitch can be possible.
N61 series nozzles for FR-301
Equipped with high-precision temperature control function
Uses HAKKO’s unique sensor feedback control method.
Easy temperature control
- CAL enables fine adjustment of temperature
- LED indicators let you easily see when the heater is active and idling at your temperature setting.
Reduction of solder clogging by improved heating core
* In comparison with the previous model
Easy filter maintenace
The structure of the filter pipe is same as HAKKO FR-410 desoldering station. That makes it easier to clean the filter pipe compared to the previous model.
Part numbers of the replacement parts
The filter pipe assembly, a set of the five parts, is also available.
Quick Change Nozzle System provides speed and safety
The Quick Change Nozzle System allows for a safer and simpler method to quickly remove nozzles for cleaning or replacement, even when the unit is hot.
Includes simple iron holder
Prevents burns and accidents with hot parts
Power switch on grip
Convenient for temporal stop of operation. Turning off the power can reduce nozzle oxidation.
Includes carrying case
Comes with a carrying case for prompt storage after use.
|Model No.||Packing List|
|FR-301||Unit, Pre-filter, Ceramic paper filter (L; 2pcs), Nozzle wrench, Iron holder (simple type), Cleaning pin for heating core, Cleaning pin for Φ1 mm nozzle, Instruction manual
|Power consumption||100V 98W (50/60Hz)
110V 122W (50/60Hz)
120V 140W (50/60Hz)
220V 100W (50/60Hz)
230V 110W (50/60Hz)
240V 120W (50/60Hz)
|Temperature range||350 to 500ºC|
|Nozzle to ground resistance||<2Ω|
|Nozzle to ground potential||<2mV|
|Vacuum generator||Diaphragm pump|
|Vacuum pressure||81kPa (610mmHg)|
|Heating element||Ceramic heater|
|Standard nozzle||Φ1mm (No.N61-08)|
|Dimensions||215(W)×226(H) mm (with Φ1 mm (No.N61-08) nozzle)|
|Weight||0.52kg (with Φ1 mm (No.N61-08) nozzle)|
* Total length and weight (w/o cord)
Soldering Tip / Nozzle
* These nozzles are not compatible with the discontinued HAKKO FR-300 handy desoldering tool.
|B5185||Filter pipe assembly
* The replacement for B5105.
|with ceramic paper filter and related parts||Buy|
|A5044||Ceramic paper filter-L (qty 10)
* The replacement for A1033.
|C5003||Iron holder||simple type|
|B1085||Cleaning pin||heating core|
|B1087||Cleaning pin||nozzle Φ1mm||Buy|
|C5042||Carrying case||for FR-301|
|C5046||Nozzle quick changer||for FR-4103, FR-301||Buy|
|B5231||Oval nozzle positioning jig||for FR-301|
|C1100||Iron holder <w/ cleaning sponge>|
|B1086||Cleaning pin||nozzle Φ0.8mm||Buy|
|B1088||Cleaning pin||nozzle Φ1.3mm||Buy|
|B1089||Cleaning pin||nozzle Φ1.6mm||Buy|
|B1302||Cleaning drill||nozzle Φ0.8mm||Buy|
|B1303||Cleaning drill||nozzle Φ1mm||Buy|
|B1304||Cleaning drill||nozzle Φ1.3mm||Buy|
|B1305||Cleaning drill||nozzle Φ1.6mm||Buy|
|B1306||Drill holder||nozzle Φ0.8/1mm||Buy|
|B1307||Drill holder||nozzle Φ1.3/1.6mm||Buy|
|B1308||Drill (nozzle Φ0.8mm, qty 10)||Buy|
|B1309||Drill (nozzle Φ1mm, qty 10)||Buy|
|B1310||Drill (nozzle Φ1.3mm, qty 10)||Buy|
|B1311||Drill (nozzle Φ1.6mm, qty 10)||Buy|
|Top Tips||Top Tips for Successful Soldering and De-Soldering Processes|