FR-410 Desoldering tool
- Desoldering tool with built-in vacuum pump
- 140 W high power enables perfect desoldering on multi-layer PWB
- New type nozzle can fit onto micro land patterns and narrow space
- New functions allow the improvement of maintainability and reliable desoldering
140 W high powers enable perfect desoldering for the components on multi-layer PWB
Increasing the power to 140 W from 50 W of our previous models (HAKKO 474・475), it can make it easy to desolder on multi-layer PWB which was never an easy job, and it can also shorten the process time.
A wide selection of nozzle, with the addition of new types, is available for a variety of desoldering works.
Applicable to even micro lands, components in a narrow space or flat type terminals on the PWB of downsized devices like mobile phone.
Secure desoldering, valve function that suctions with high pressure
Suction starts 0.2 seconds after pulling the trigger for instance and high pressure suction to achieve complete desoldering.
Reduction of solder clogging
Improvement in heating core
Heating ability for backside of heating core is increased to ensure suctioned solder be carried to filter pipe and avoid solder clogging.
Featuring ACF (Anti Clogging Function)
ACF (Anti Clogging Function) ensures suctioned solder be carried to filter pipe by keeping the pump running for a certain period of time (1 to 5 seconds) automatically after releasing trigger.
Improvement in maintainability
Easy nozzle replacement
The dedicated wrench allows safe, easy and smooth nozzle replacement.
Easy heater replacement
Easy heater replacement by removing 3 screws on the part of heating core.
Larger filer and more transparency
Filter size has been increased to protect the pump from contaminants, and transparent filter cover allows quick visual check of the filter condition.
FR-410 comes with a tool box that contains of maintenance tools to keep nozzles and heater in a good condition.
Featuring a large LCD display
Very easy to see temperature on the large LCD display
Vacuum indicator to check clogging
|Model No.||Packing List|
|FR-410(w/No.FR-4103)||Station, Desoldering tool (FR-4103), Power cord, Iron holder (with cleaning wire), Tool box (Cleaning pin for ø1.0 mm, Cleaning pin for heater, Cleaning drill for ø1.0 mm, Nozzle wrench, Filter [qty 2], Ceramic paper filter [qty 4]), Instruction manual
|Model No.||FR-410(Desoldering tool: FR-4103)|
|Temperature range||330 to 450ºC|
|Temperature stability||±5ºC at idle temperature|
|Output voltage||AC 24V|
|Vacuum generator||Vacuum pump, double cylinder type|
|Vacuum pressure||Max. 80kPa (600mmHg)|
|Power consumption||140W (24V)|
|Nozzle to ground resistance||<2Ω|
|Nozzle to ground potential||<2mV|
|Heating element||Composite heater|
|Standard nozzle||Φ1.0mm S type (No.N61-05)|
|Total length||168mm (with Φ1.0mm S type nozzle)|
|Weight||190g (with Φ1.0mm S type nozzle)|
* The suction flow is measured at the filter case suction port of station.
* Total length and weight (w/o cord, hose)
Soldering Tip / Nozzle
* These nozzles are not compatible with the discontinued HAKKO FR-300 handy desoldering tool.
|FR4103-81||Desoldering tool FR-4103
* The replacement for FR4101-81.
|A5055||Heating element||140W (24V), for FR-4103||Buy|
|B5222||Enclosure pipe||for FR-4103||Buy|
|A5020||Filter (qty 10)||Buy|
|B5185||Filter pipe assembly
* The replacement for B5105.
|with ceramic paper filter and related parts||Buy|
|B5105||Filter pipe assembly
* Discontinued. The replacement is "B5185".
|with ceramic paper filter and related parts|
|A5044||Ceramic paper filter-L (qty 10)
* The replacement for A1033.
|A1033||Ceramic paper filter-L (qty 10)
* Discontinued. The replacement is "A5044".
|A1013||Diaphragm (qty 2)||Buy|
|A1014||Valve plate (qty 2)||Buy|
|B1087||Cleaning pin||nozzle Φ1mm||Buy|
|B1215||Cleaning pin||heating element||Buy|
|B1303||Cleaning drill||nozzle Φ1mm||Buy|
|B1306||Drill holder||nozzle Φ0.8/1mm||Buy|
|B1309||Drill (nozzle Φ1mm, qty 10)||Buy|
|FH410-82||Iron holder <w/ cleaning wire>||Buy|
|B5063||B5063 Motive Joint Replacement||Buy|
|B5064||B5064 Wave Spring Replacement||Buy|
|B5101||B5101 ESD Hose for FR-4101 Desoldering Tool||Buy|
|B5224||B5224 Joint Cover for FR-4101 Desoldering Tool||Buy|
|B3675||B3675 Fuse 220-240V||Buy|
|C5046||Nozzle quick changer||for FR-4103, FR-301||Buy|
|B5230||Oval nozzle positioning jig||for FR-4103||Buy|
|B2874||Cleaning pin||nozzle Φ0.6mm||Buy|
|B1086||Cleaning pin||nozzle Φ0.8mm||Buy|
|B1088||Cleaning pin||nozzle Φ1.3mm||Buy|
|B1089||Cleaning pin||nozzle Φ1.6mm||Buy|
|B5141||Cleaning drill||nozzle Φ0.6mm||Buy|
|B1302||Cleaning drill||nozzle Φ0.8mm||Buy|
|B1304||Cleaning drill||nozzle Φ1.3mm||Buy|
|B1305||Cleaning drill||nozzle Φ1.6mm||Buy|
|B5142||Drill holder||nozzle Φ0.6mm||Buy|
|B1307||Drill holder||nozzle Φ1.3/1.6mm||Buy|
|B5143||Drill (nozzle Φ0.6mm, qty 10)||Buy|
|B1308||Drill (nozzle Φ0.8mm, qty 10)||Buy|
|B1310||Drill (nozzle Φ1.3mm, qty 10)||Buy|
|B1311||Drill (nozzle Φ1.6mm, qty 10)||Buy|