FT-710 Soldering Tip Cleaner and Polisher

£134.42
Excluding VAT
Available for Order**
SKU
HFT710-05

older-splash-preventing rotary tip cleaner
Level of solder removal can be adjusted using two different types of brushes. It also reduces the oxidation of tips
Brushes can be replaced without using any tools, and safe design prevents solder wastes from entering drive part

click to enlarge image

Features

Tip cleaner having both wire-type and sponge-type advantages
  Prevents solder from splashing when cleaning.
  · Inserting just the tip into the receptacle completely prevents solder from splashing.
  Inserting the iron here blocks the receptacle and prevents solder from splashing. 
  Two-types of brushes control how much solder is removed.
  · Solder removal status can be adjusted by plastic brushes and metallic brushes.
  With wire-type cleaners, excessive amounts of solder remain on the tip, which causes solder to splash when soldering. With sponge-type cleaners, oxidation is promoted, which causes shorter tip life.
· A tip cleaner with both wire-type and sponge-type advantages eliminates the above problems when soldering.

  Comparison of how much solder is removed by the different cleaning methods<
  * The photos show the iron tips T12-D24.
   Comparison of how much solder is removed by the different cleaning methods


  Minimizes decrease in temperature of the tip while cleaning.
  · Inserting the tip turns the brush automatically; no need to switch it on and off.
· Reduces the tip cleaning time between soldering works to increase work efficiency.
· The electric rotary cleaner provides a uniform final cleaning status with no differences between individuals.

  Comparison of decrease in tip temperature by cleaning method
  If decrease in temperature is small, the time for a single cleaning also becomes short. Because cleaning is performed many times per day, the overall working time can be also shortened.
  Time for single cleaning (The time for a single cleaning is measured as the time until the tip temperature reaches the set temperature after cleaning.)
 
HAKKO FT-710 Approx. 2.3 sec. (reference value)
Wire-type HAKKO 599B Approx. 2.9 sec. (reference value)
Cleaning sponge Approx. 6.0 sec. (reference value)
Comparison of decrease in tip temperature by cleaning method

  The low-noise design relieves stress due to noise during work.
  * This cleaner is very quiet in comparison with competitor's electric tip cleaner.
  Easy to maintain Easy to maintain
  · Easy-to-replace brushes
  → Brushes can be replaced without removing any screws.
  · Solder left inside is stored in "Solder waste collector".
  → Solder does not splash all over the inside of the main body.
  · Safe design prevents brushes from turning unexpectedly during replacement.
  → The brush cannot be replaced unless the AC adapter is unplugged.
   
  This tip cleaner can be attached to HAKKO iron holders HAKKO FH-101, FH-200 and FH-201.
  · This tip cleaner can be attached to any of the above 3 iron holders using just 2 screws. For other iron holders, this tip cleaner can be placed next to the iron holder.
Example when attached to the HAKKO FH-200,Example when using with the HAKKO FH-800 * The HAKKO FT-710 itself cannot be used as an iron holder. Be sure to use it together with an iron holder.

Packing List

* Some soldering irons or tip shapes are NOT available.
Please check 'Specification' if your soldering iron or tip shapes are available.

Part No. Packing List
FT-710 HAKKO FT-710, AC adapter, Receptacle A and B, Lock nut, Solder waste collector, Gauge, Instruction manual
NOTE: Optional Part Receptacle C being purchased, HAKKO 917(Discontinued) (Station HAKKO 938(Discontinued)) and HAKKO FX-8301(Station HAKKO FX-838) are also available.

Specifications

Model No. FT-710
Rating DC 24 V 130 mA
Brush rotational speed 2,500rpm
Standard receptacle Receptacle A and B
Dimensions 71(W)×77(H)×107(D) mm
Weight 450g

・AC Adapter

Output voltage DC 24 V
Applicable Soldering Iron List
Receptacle Soldering tip Unusable shape Custom-ordered shape Soldering iron
Receptacle A T7 series T7-JL02
Spatula
T7-KF HAKKO FM-2027
Station:
HAKKO FM-202 (Discontinued)
T11 series - - HAKKO FX-901
T12 series T12-JL02
Quad
Tunnel
Spatula
T12-WB2
T12-WD08
T12-WD12
T12-WD16
T12-WD52
T12-WI
 
T12-DL52
T12-KF
HAKKO FM-2027/2028 for Japan, Oceania, Asia & Other countries
Station:
HAKKO FM-203, HAKKO FX-950, HAKKO FX-951, HAKKO FX-952, etc.
T15 series T15-XD15
T15-JL02
T15-JD14
T15-JD16
T15-R48
Quad
Tunnel
Spatula
T15-1603
T15-1605
T15-BC15
T15-BC28
T15-CF2
T15-CF3
T15-SB03
HAKKO FM-2027/2028 for North America & EU. Station:
HAKKO FM-203, HAKKO FX-950, HAKKO FX-951, HAKKO FX-952, etc.
Receptacle B T14 series - - HAKKO 957 (Discontinued)
T18 series - - HAKKO FX-8801 Station:
HAKKO FX-888 (Discontinued),
HAKKO FX-888D
T34 series - - DASH:FX-650 series
900 M series 900M-T-H
900M-T-1.8H
900M-T-LB
900M-T-1.2LD
HAKKO 900 Type Medium HAKKO 907
Station:
HAKKO 928 (Discontinued),
HAKKO 936 (Discontinued),
HAKKO 937 (Discontinued) etc.
Receptacle C (Optional Part) T10 series - T10-J02
T10-K
T10-KL
T10-KU
T10-LB
T10-LI
HAKKO 917 (Discontinued)
Station:
HAKKO 938 (Discontinued)
T13 series
T17 series
- - HAKKO FM-2026
Station: HAKKO FM-203, HAKKO FX-950, HAKKO FX-951, HAKKO FX-952, etc.
T20 series - T20-K
T20-KU
T20-BL
T20-BL2
T20-BL3
HAKKO FX-8301
Station:
HAKKO FX-838
T22 series - T22-C3
T22-BL
T22-BL2
T22-D45
T22-J02
T22-K
HAKKO FM-2030,
HAKKO FM-2031
Station:
HAKKO FM-206
Receptacle,
custom-designed
T19 series - - HAKKO FX-8805  
Station: HAKKO FX-889
T33 series T33-BC2
T33-BC3
T33-BC4
T33-BC5
T33-BC6
T33-D24
T33-D32
T33-D5
T33-D6
T33-1610
T33-1611
T33-SSBC2
T33-SSBC3
T33-SSBC4
T33-SSBC5
T33-SSD24
T33-SSD32
T33-SSD16
T33-SSD6
T33-SS1610
T33-SS1611
HAKKO FX-8802
Station: HAKKO FX-801
PRESTO series - - HAKKO PRESTO
*Soldering iron other than listed above (HAKKO FX-100, HAKKO FM-2032, Built-in solder feed type, Nichrome heater type and HAKKO 455/456), and Desoldering / Rework are not available.
  Part No. Name Specifications  
photo:A1567 A1567 Cleaning brush B (metal brushes, qty 2)   Buy
B3519 Receptacle C   Buy
B3523 B3523 Lock nut for FT-710 C   Buy
B3518 B3518 Receptacle B for FT-710   Buy
A1566 A1566 Cleaning brush A (plastic brushes, qty 2)   Buy
B3521 B3521 Solder waste collector for FT-710   Buy
B3520 B3520 Pulley belt   Buy

Tech Tips

Tech Tips

Category Title
Derek's Tech Tips Effective Cleaning & Maintenance of Soldering Tips